Sharing the link below with a person will let them view the same configuration you have on the screen. However, they will not be able to access your shopping cart or account information.
Grommets: If you select grommets, the center of the grommets will be 4" inches from the left and right edges, and 1" inch from the top and bottom edges.
If you select corner grommets, the center of the grommets will be 1 inch from all edges.
Additional Finishing: Wire H-Stands and grommets are optional.
File Type: Print Ready PDF file
Special Instructions: H-Stands - ONLY for 4mm Min size is 12"
NOTE:
If you are using directional arrows on your signs. Your PDF file should be 2 pages with each arrow pointing in the opposite direction;
If the Wire H-Stand Compatible option is not selected, may be produced with either vertical or horizontal
Items that are Wire H-Stand Compatible have vertical flutes that facilitate H-Stands into the signs. Say Yes to Wire H-Stand to receive the actual Wire H-Stand with your order
Special Instructions: We highly caution against using the board outdoors, especially in harsh weather conditions
Special Instructions
Attention: Be sure to DELETE any hidden layers that are not intended to print (ie: setup guide layers or other hidden artwork layers) to ensure no risk of them appearing on the final print.
The file has at least 0.125 inches of bleed each way
The artwork matches the product's dimensions
The type is outlined and inside a safe margin
Using CMYK color only (no RGB or Pantone)
Images at least 300 dpi
Convert effects to bitmap
The dieline shape must be a single path stroked
Save the file as a high-resolution PDF
Please ensure that your file follows all the information above and matches the order specification before proceeding to check out. By clicking on CHECK OUT you agree with our terms and conditions. We are not responsible for any printing divergence caused by files that were sent without respecting these instructions.
